• Seastyle

     

    Seastyle Servicing

    Our experience and qualifications

    Here at Seastyle we are able to service almost any make of regulator or BCD. Our main technician has over 30 years experience, and trained/authorised by the appropriate manufacturers to carry out service and repairs to your evaluable equipment. Regardless of the condition of the equipment every set of regulators is completely stripped down and cleaned in a sonic bath. Parts are then inspected and damaged parts replaced as required. All service parts/kits are supplied direct from the manufacturers. All parts that are replaced are sent back to you as proof of replacement. After carefully re-assembling, all equipment is properly set and adjusted using the appropriate equipment.

    Regulator Efficiency

    All regulators need regular servicing to make sure they perform at optimum performance ensuring you are getting as good a breathe as possible. All manufacturers recommend annual servicing regardless of the amount of usage.
    The performance of your regulators will gradually decrease over time and will often be so gradual as it cannot be noticed. However it is important that they are serviced to ensure their efficiency and your safety. This is particularly true after an overseas trip where it is possible that debris from the tank may cause blockages in the valves. Regulators should be serviced every twelve months, to keep them working at optimum performance levels.

    Traveling Overseas?

    All of our servicing work is guaranteed. We recommend that you have your equipment serviced well before that important dive trip or holiday and try it out prior to travel. Regulators in particular can settle and may require a final adjustment to achieve optimum performance.

    Most repair/servicing work is usually completed within 7-14 days however a charge for any fast track emergency service is also available on request.

    Certificates will be supplied following Cylinder Visual & Hydrostatic Inspections and Non Destructive Aluminum testing along with IDEST cylinder stamping.

    Servicing of the following items available:-

     

    REGULATORS BCD’S
    Regulator 1st stage BC Inflator BCD’s (Single bladder)
    Regulator Primary 2nd stage BC Inflator BCD’s (Double bladder)
    Regulator Alternate Air/Buddy Auto Air/Scubapro Air2 Buddy Auto Air / Scubapro Air-2 in addition to BCD service.
    Oxygen clean Regulator at time of full service completed Free of charge  
    DRY SUITS CYLINDERS
    Dry Suit Valve fitting + parts Hydrostatic inspection ( Includes mandatory valve service)
    Dry Suit Valve service Visual inspection ( Includes mandatory valve service)
    Cuff Replacement (inc. latex seals) Aluminum (Non Destructive Test)
    Neck Replacement (inc. latex seals) Internal Shot Blast
    Neoprene Dry Suit repairs - neck seal, wrist seals External Shot Blast
    Pressure test Zinc Coat
    Repair holes Paint (1 colour) Paint with Black and White Quarters
    Seal a Valve hole Oxygen clean Cylinder and Valve
      Twin Set
    WET SUITS  
    Wetsuits repairs on request  
    COMPUTERS & WATCHES  
    Suunto Computer Battery Change  
    Uwatec Computer Battery Change  
    Watch Battery  
    Pressure Test  
    Citizen Watches

     

     
    Computer strap   Aqua-Lung Legend   Scubapro Air II   Scubapro Regulator   Manufold   Poseidon Regulator
    PADI
    © 2010 Seastyle All Rights Reserved